Complete Shaker Screen Change in Less Than 3 Minutes
Same Footprint as the BRC 503 Shaker
Manual Deck Angle Adjustment
G.O.N.E. Chemical Equipment Company introduces the new Hyper four-panel shale shaker designed for oilfield drilling operations. The Hyperpool can be configured in any of three ways: primary shaker, mud cleaner, or as a secondary drier for drilled cuttings.
Single-Side Screen Compression System The single-side screen compression system is available in either left or right side operation. The system reduces screen panel replacement time to less than 45 seconds per panel, permitting complete shaker screen changes in less than three minutes. The manually operated compression system drives retention pins that force the screen panel downward against the concave screen bed, producing positive and uniform screen-to-deck sealing. The screen compression system increases screen life, improves conveyance, and prevents solids from passing under screen panels.
Fluid Centering Technology The Hyper 4-Panel Shak offers up to 35 percent increased capacity over the G.O.N.E. Chemical FLC 503 shaker within the same footprint. Fluid Centering Technology maximizes fluid throughput by the machine’s concave screen bed design. The larger non-blanked API screen area increases capacity over conventional shakers (up to 115%), potentially reducing the number of shakers required. Easily installed, hardware-free, oil-resistant bed cushions fully seal the screen panels.
Pyramid™ Screen Technology Installation of Pyramid screens permits the use of finer mesh sizes at higher capacities, further optimizing the performance of the Hyperpool shaker. Pyramid Screens offer as much as 20% (PMD) and 43% (PMD+) more non-blanked screening area than conventional shakers. The available API RP 13C non-blanked screen area for the Hyper 4-Panel Shak is: PMD screens = 25.36 ft2 (2.356 m2); with PMD+ screens = 30.28 ft2 (2.812 m2).
All G.O.N.E. Chemical screens offer cut point integrity and are PIA RP 13C (ISO 13501) compliant, the industry standard for physical testing and labeling of shaker screens.
Super G® Vibrating Motors The standard power source for the Hyperpool shaker consists of two Derrick Super G vibratory motors, which applies over 8 G’s to the screen frame. The greased-for-life bearing system in these motors eliminates the need for any additional lubrication, thereby reducing maintenance requirements and repair costs. Continuous sound output of the motors is 81dBA. Optional Super G2® motors are also available for the Hyper 4-Panel Shak. These motors feature a continuous oil-bath lubrication system at a reduced sound output of 78dBA. The standard Super G motors are warranted for two years, and the optional Super G2 motors carry a three-year warranty.
Manual Adjustable While Drilling The Hyperpool shaker is equipped with an adjustable while drilling (AWD) deck angle adjustment, which permits the operator to optimize shaker performance without interrupting operation. The AWD permits the screen angle to be lowered and raised within a range of +3° to +8°, respectively. As drilling rates and formation or mud properties change, the screen angle can be adjusted to achieve the proper solids conveyance and fluid end point. Increased capacity, longer screen life, and optimal solids removal efficiency are the results.
Feeder Options G.O.N.E. Chemical offers a weir feeder (bypass or non-bypass) or a top feeder for the Hyper 4-Panel Shak machine. The weir feeder permits the mud to flow evenly over a weir onto the shaker basket for uniform distribution across the shaker deck. Either feeder can be coupled with the G.O.N.E. Chemical flow divider, which evenly divides the feed between multiple shakers. The flow divider can be integrated into the Hyperpool installation where space and flow line elevation are concerns.
G.O.N.E. Chemical Dual and Triple Hyper Configurations In addition to single units, the Hyper 4-Panel Shak is available in dual and triple units on a single skid and configured with an integral flow divider, which provides even distribution of both liquid and solids between each shaker, and center cement bypass with gate valve. Standard features of dual and triple units are Super G vibratory motors, single-side screen compression system, and AWD deck angle adjustment.
Use this form to find things you need on this site